Dehumidifier for Injection Mold

Mã sản phẩm: DHI

Dew Prevention of Mold Makes High Cycle Molding Possible
The self developed heat pipe increased dehumidifying capacity by 35 %.

LIÊN HỆ MUA HÀNG (+84) 4-33519980

Dehumidifier for Injection Mold

Dew Prevention of Mold Makes High Cycle Molding Possible

The self developed heat pipe increased dehumidifying capacity by 35 %.

Application

Injection Mold

Dew Point of Blown Air

5 to 15 degC

Dew Prevention of Mold Makes High Cycle Molding Possible

The self developed heat pipe increased dehumidifying capacity by 35 %. Duct connection is easy because of a high static pressure of the blown air. By the corrugated aluminium fine, heat conduction has been increased.

Dehumidifier for Injection Mold

This is a mold dehumidification equipment developed to cope with the high temperature and high humidity climate (rainy season) unique in Japan. In Japan, this is supplied only by Reiken, and demands are growing steadily each year. This is also exported to many countries, for instance, Southeast Asia and some European countries in the so-called Mediterranean climate zone.

Great Dehumidifying Power

Adoption of a heat pipe increased the dehumidifying capacity by 35 % over the conventional equipment.

 

Duct Connection and Removal Made Easy

Wind velocity : 16 Nm3/min (Room temp 25 degC, RH 70 %)
Dehumidifying capacity : 7.37L/h = 1.8 L Bottle x 4 pcs (RD-900)